RG Manufactured Stone Veneer FAQ

 

 

                                                        

 

 

Do RG Manufactured Stone Veneer products have a warranty?
Yes. The warranty on the stone is a 50-year limited warranty.
How does RG Manufactured Stone Veneer product hold up in the weather?
Existing applications shows no undesirable change after years of weathering.
How do you clean RG Manufactured Stone Veneer?
Using water and soap can often clean the surface of RG Manufactured Stone Veneer products. We do not recommend the use of a pressure washer.
Do you do installation?
We are more than happy to help you arrange installation with a qualified contractor. Please call us at 303-791-1233 to find out more.
What kind of surface do you need to apply RG Manufactured Stone Veneer?
The existing surfaces must present a firm and unified base for the veneer. On exterior applications it is recommended all wood surfaces and other surfaces not classified, as a "water barrier" should have a layer of 15 lb. felt paper applied before installing wire lath.
Can you seal RG Manufactured Stone Veneer?
Yes. However, we recommend a sealer that will not leave a residue which could detriment the look of the stone. Please call us at 303-791-1233 for recommended sealer options.
Can you use RG Manufactured Stone Veneer for walkways, patios?
No. RG Manufactured Stone Veneer products are not structurally designed for use on walkways, patios, drives, etc.
Can RG Manufactured Stone Veneer be used for water fountains and swimming pools?
No. Regardless of manufacturer, precast stone is not designed for constant contact or submersion with water.
Can RG Manufactured Stone Veneer products be cut?
Yes.RG Manufactured Stone Veneer are easily cut and trimmed using nippers, or with a diamond saw blade. However, if you do cut Sunset Stone the color is not all the way through so you will have an unfinished edge. It is recommended that mortar be lightly applied to the cut edges.
What is the average thickness of RG Manufactured Stone Veneer?
1 ½" to 2" depending on the style and texture of the stone.
How much does RG Manufactured Stone Veneer weigh?
The weight of RG Manufactured Stone Veneer products is approximately 8 to 11 lbs per square foot.
Will Sunset Stone products retain their color?
All natural iron oxides are utilized to manufacture RG Stone Veneer. These oxides, which are the primary coloring elements, carry the same weathering characteristics as real stone. Under normal circumstances, and when applied per manufacturer's specifications, no undesirable change in color occurs after years of weathering.
Can I install RG Manufactured Stone Veneer myself?
Yes. If you accustomed to working with masonry tools and supplies, anyone can install our product by following the simple instructions on our Installation Specifications page.