stone veneer china manufacturers  classification and how to choose



Some of the home decoration also used stone, the stone is made of natural stone or artificial stone good good? Natural stone and what classification and how to choose it? Xiaobian for everyone in this brief introduction.

First, the classification of stone

   Stone into natural stone and artificial stone veneer, natural stone by geological classification method is divided into igneous rocks, sedimentary and metamorphic rocks three categories; artificial stone artificial stone is divided into cement type, polyester artificial stone, artificial stone and composite sintered artificial stone.


Second, the technical nature of the stone:

A compressive strength. Non-homogeneous and anisotropic brittle materials. The standard test method specified in the standard specimen was measured average compressive strength of stone, the stone intensity is divided into nine levels.

(2) Apparent density. With stone mineral composition and porosity related, according to the apparent density can be divided into light and heavy stone stone two categories.

3 water resistance. Stone softened water resistance coefficient values according to their size into three classes, namely:

Stone high water resistance: softening coefficient greater than 0.9;

The water resistance of stone: softening coefficient between 0.7 --- 0.9;

Low water resistance of stone: softening coefficient between 0.6 --- 0.7

4 absorbency. Stone reduced strength after water absorption, frost resistance variation, increased thermal conductivity, water resistance and durability. The apparent density of the stone, small porosity, water absorption is also small.
5 frost resistance. Frost resistance and water absorption stone size are closely related. Generally large stone water absorption, frost resistance is poor. In addition, frost resistance but also with stone water saturation, freezing and thawing times relevant degree. Stone in the water saturation, the required number of freeze-thaw cycles, and the absence of weight loss through the seam does not exceed 5% strength loss does not exceed 25%, compared with antifreeze qualified. edited by stone veneer china manufacturers

2013 International Cultured stone veneer, granite Exhibition

Date: 18-21 November 2013
 Location: Tianjin Meijiang Convention and Exhibition Center

Date: 18-21 November 2013
 Location: Tianjin Meijiang Convention and Exhibition Center
Organizer: China Building Decoration Association
Organizer: China Building Decoration Association Information Advisory Committee
   Zhongzhuang Jingmin (Beijing) Exhibition Co., Ltd.
Supported by: Tianjin People's Government / Tianjin Bureau of Commerce / Water Town People's Government / State
Stone house Quality Supervision and Inspection Center / China Real Estate Association
 China Interior Decoration Association / National Federation of stone Industry Association / National Federation
Stone Industry Association Professional Committee of composite panels / China Building Decoration Network
50,000 square meters exhibition area (Full House), 600 stone business, 150 Stone Machinery
Exhibitors
1500 decoration project managers, 2000 decorators visit
A stone building decoration industry focus event
Tianjin Stone Fair advantages:
1, Tianjin has become the North's largest stone import and export, processing, distribution, consumption
Heart, Tianjin Wuqing, Baodi, Jinghai, Jinnan, Tanggu have built stone industry
Parks and stone wholesale market. Tianjin Tanggu District Huamin international stone market, the Beijing-Tianjin International
ABP a stone, two, three, world Ishigura are Lee coastal building materials industry
Park, nine parks have been built of stone headquarters incubators, Tianjin City, within the main stone wholesale
Course layout has been completed, more than 1,500 domestic stone companies have vied for the Tianjin market;
2, adjacent to Beijing and Tianjin, Tianjin, two international airports, sitting Tianjin Xingang, Qinhuangdao
Hong Kong and JIngtang three international ports, as well as speed and ease of the surrounding national railway
Backbone for stone import and export operations, or radiation to the northern cities, these
Are a good geographical advantage.
3, Tianjin powerful building efforts led to the massive demand for stone products;
4, the Tianjin Port vast economic hinterland, covering 52% of the area, bonded generous policy
Become an ideal choice for foreign imports blocks, attracting more and more blocks supplier
Concerned;
5, China Building Decoration Association, China Building Decoration Association Information Advisory Committee
The entries show for the contractor, will cause the national architectural firm, curtain wall decoration enterprises, set up
Accountants of great concern for the domestic architectural engineering choice of stone products and stone works
Service providers to build an important platform.
6, the face of the huge domestic construction market, the exhibition once launched, Dongsheng, high, China
Hui, Bandung, Wanli Stone, china cultured stone siding panels a long time, Wan Ling and other stone industry leaders have registration and participation
Show. After three months of investment work, N1, N2, N3, N5, Hall sold out, N6 number yet
I parts of the stands, companies interested in participating, please contact us fast, ask for the exhibition drawings.
Scope of Exhibits:
1, stone type: marble blocks, granite blocks, sandstone blocks, limestone, stone,china cultured stone siding panels
England, sandstone, slate, etc.;
2, plate categories: natural stone plates, marble, granite, sandstone plate
Wood, composite plates, environmental stone;
3, artificial stone: artificial quartz stone, artificial culture stone, artificial stone plate;
4, tombstone categories: Chinese tombstone, Japanese tombstone, Korean tombstone, European tombstone, Russian
Tombstone, American tombstone, tombstone Art
5, stone products categories: stone carving, stone products, stone products, garden landscape stone, fake
Rocks, etc.;
6, the environment decoration: pebbles, blind stone, antique stone, landscape stone, cultured stone veneer, grinding
Mushroom stone veneer, stone coated steel roof tile,etc.;
7, stone machinery and processing equipment; mine saw series, stone cutting machine, stone machine is
Columns, stone cutting machine, cutting thin machine, copying machine, polishing machine series
, Artificial stone machinery series, mosaic machinery series, stone engraving machine, diamond
Tools, all kinds of saw blades
8, conservation materials and equipment: cleaning machinery series, cleaning tools, cleaning agents series
Row
9 stone conservation and bonding, sealing materials, stone alternatives (ceramic stone, etc.), etc.; Stone
Timber mining equipment

Charges: indoor standard booths: 9800/9m2
Indoor light: (36m2 accrue) 980/m2
More show information, please contact:
Zhongzhuang Jingmin (Beijing) Exhibition Co., Ltd.
Contact: Tony Philippine 13511073611
by china stone veneer manufacturer

Sri Lanka Sri Lanka, China Building Materials Exhibition and Fair breeze basically the end product

china stone veneer manufacturer
 
"Sri Lanka Building Materials Exhibition" and the "Sri Lanka China Commodities Fair" breeze and preparatory work has been basically completed, the LANXESS century exhibition company will bring 16 Chinese enterprises to Colombo with Sri Lanka local exhibitors together exhibitors, this is the first time Chinese enterprises large Log in Sri Lanka market, this pavilion enterprises from Zhejiang, Beijing, Hebei, Jiangxi, Guangdong and other places, will show in Colombo, building materials, textile products.
     It is understood that LANXESS century China as the show's organizers, the Chinese enterprises will be held during the exhibition "Sri Lanka market briefings" and invited the Chinese Embassy Economic Counselor Embassy of Sri Lanka, the organizing committee CEO, Lanka Association of building materials, Chamber of Textiles and other important people for Chinese enterprises to explain Lankan market and trade environment, and promote trade between the two countries and Slovakia, for the Chinese enterprises to open up new markets in Sri Lanka.edited by china stone veneer manufacturer

First China (Kashgar) International Building Materials Fair successfully held

June 28-July 2, 2009, by the Guangdong Building Decoration Materials Industry Association, China hosted the first lead (Kashi) International Building and Decoration Materials Fair successfully held in Kashi, marking the Guangdong Building Materials Yuanjiang achieved initial victory.

It is understood that the exposition, Guangdong Building Materials Yuanjiang important project. By the Guangzhou Municipal People's Government, Kashi prefecture, Xinjiang Uygur Autonomous Region Department of Commerce organized, Guangdong Building Decoration Materials Industry Association, People's Government of Shufu County, Kashi Shufu Guangzhou International Trade City Limited has undertaken. In Kashgar, Guangzhou Metro, Guangdong Jian Bo main venues to "Guangdong Building Materials, the world building" as its theme, is "the first Kashgar Fair" and the "Ninth Caledonia Fair," the building main venue.
Exhibition attracted nearly 300 famous manufacturers in Guangdong, more than 10,000 varieties of exhibitors, exhibition area of 50,000 square meters, covering building materials, furniture, lighting and other various categories. And give full play to advantages of industrial clusters in Guangdong, Foshan ceramics to create a boutique area, bathroom plumbing District, Jiangmen, Dongguan Famous Furniture Area, Guzhen International Lighting Museum, Shunde famous paint shop, South Street, featuring an aluminum formats. Representative exhibitors new Pearl Ceramics Group, Mona Lisa Ceramics Group, Jianmei Aluminum Group, Albert Aluminum Group, China Paint, paint the big treasure, male plastic pipes, Qiaodeng bathroom, Allston appliances, Boston lighting, natural flooring, new sunlight stone coated metal roof tile , RG china cultured stone siding panels.

And so on. Or conclude a contract signed during the exhibition, intention of the project 3463, contract, the amount of 41.07 million yuan intention, field sales amount of 33.85 million yuan.edited by china stone veneer manufacturer

2013 of artificial china stone veneer industry will usher in rapid development

 
 
 
Today, artificial stone market is growing very rapidly, to get the real estate, home cabinets, decorative building materials and other industries alike. Meanwhile, the development of china artificial stone veneer industry  also benefited from China artificial stone and quartz stone manufacturing industry continues to in-depth study and strong inclusive capabilities, products quickly spread wider broader market segment.

In addition to being the real estate control policies related effects, the global economy showed deserted situation, exposure to cold environment, surrounded by a large, artificial stone veneer and quartz stone sales and the development of contrast, there has been more or less lag.
2013 With the artificial stone and quartz stone manufacturing technology continues to mature, advanced production equipment and self-energy of the operating system, its artificial stone products in the market, the advantage is more outstanding, present, China's building materials industry has been further specification in real estate and other factors, the traditional building materials industry has been a great shock, artificial stone industry is likely to face re-shuffle of the situation, but for the artificial stone industry opportunities. If you can say that the artificial stone industry a good grasp this opportunity, it will usher in a golden period of development.edited by china cultured stone siding panels

stacked stone veneer wall cladding 

 stone veneer  has a richness of texture and colour that adds a sense of timeless elegance to any indoor or outdoor living space. Guaranteeing durability and versatility, stone veneer   products can be used to create an integrated look of enduring style.
If you seek the appealing, three-dimensional look of stacked stone, look no further than Norstone Rock Panels, a natural stone cladding system which is ideal for feature walls, pool surrounds, courtyards and entertainment areas. Equally well suited for indoor use, these stacked stone panels are also perfect for the creation of water features, especially when illuminated to highlight the colour variations.
Rock Panels are available in a selection of textures and four primary colours: the rustic, rugged appeal of Ochre; the cool, subdued tones of Charcoal; the sleek, contemporary styling of White Quartz; and the warm, mellow hues of Ivory. Handmade from select pieces of cut natural stone, each panel is unique in colour and design. And as they come in modular form, they are quick and easy to install on most structurally sound surfaces.

Beautifully textured with just a hint of roughness, these stone veneer  Rock Panels can be used to create innovative designs for any residential or commercial application. With their clean, simple and aesthetically pleasing lines, RG stone veneer Panels can transform a plain, uninspiring wall into a stunning feature wall, providing the simple yet defined geometry of a traditional stacked stone wall.


Applications
   + Interior or exterior-compliments stainless steel, glass or timber
   + Ideal for water features, also around pools and spas
   + Residential - feature walls, in kitchens or bathrooms
   + Commercial - office, shop, bar or café / restaurant fit outs
Installation
   + Suitable for cladding a brick, block or precast concrete wall
   + Use 19 mm (3/4") compressed fibrous cement board on timber stud wall
   + Cost effective and easy to install, grouting is not required
   + Use recommended tile adhesive, especially for wet areas

Colours currently available
   + Charcoal
   + Ochre Blend
   + White Quartz
   + Ivory Quartz
  by china stone veneer manufacturer

RG CHINA STONE VENEER Rock installation on concrete

RG CHINA STONE VENEER Rock installation on concrete

SETTING THE STONE
Using a mason's trowel, apply abut ¾” thick even layer of mortar to the entire back of the stone.
Then press stone firmly into place on the prepared wall, squeezing the mortar out around all edges.
Using a gentle wiggling action while pressing the stone, will ensure a good bond.
Right after setting each stone veneer, use a mason’s trowel or a margin trowel to remove any excess mortar and to fill any voids.
This serves not only to help seal the stone edges but also allows for tighter fitting of following stones.
Just prior to setting each stone, apply a thin bead of mortar with a grout bag to the edges of all previously installed, adjacent stone.
If any mortar accidentally gets on the stone face, do not try to wipe it off as it will smear and stain the stone.
The mortar should be allowed to set until dry and crumbly, and then brushed off with a dry whisk broom.edited by china stone veneer manufacturer

China is three times the volume of exports in Italy that created the world's first stone export amount.

China is three times the volume of exports in Italy that created the world's first stone export amount.

 
 

Although China's stone veneer  industry in the international arena in an important position, but for now Chinese stone unemployed itself is concerned, there are still many problems affecting the process of internationalization. How to make business in the international competition to gain maximum benefit? To ensure the health of China's stone unemployment lasting development? Stone industry industry experts to discuss how to expand the international market experience and methods.
Q: From the industry perspective, please turn to the international market to promote the development of China's stone reality and the long-term unemployed What is the significance?
Mr Lai Guoxiang (Xiamen Stone Chamber of Commerce Secretary): towards the international market, through the force to adjust the size of a small, serious pollution, high energy consumption enterprises, thereby eliminating the backward enterprises, to accelerate the restructuring of China's stone industry, changes in China's stone industry in product , technological, organizational structure irrational situation, establish matching with the international division of labor, a competitive product structure organizational structure. Control of both foreign stone industry development trends in technology, equipment, funds = management, strengthen cooperation, but also can enhance the potential for the development of China's stone industry.
Mr. Wang Jiongyu (Xiamen Xudong Stone Co., Ltd. General Manager): Chinese stone veneer  into the international market, from a practical sense, not only solved the problem of the domestic part of the workforce, but also improve the technical content of domestic stone, quality control system and management level . For example, supplied by me in Paris, France ADRIA TOWER works in the construction process must first abandon the original wall hanging plate drilling technology, while using the latest technology to accommodate hanging oblique France international demand, to achieve a good results. From a long-term sense, Chinese stone into the international market but also help enhance the environmental awareness of domestic stone industry. Europe from the Renaissance stone industry has gone through 600 years, from the stone mining, processing and packaging the entire process is fully introduced concept of environmental protection. And China's stone industry is only 20 years of development history, how to strengthen environmental awareness is currently facing the development of stone industry in China is an important issue.
Mr. Hu Jingpei (Wanli Stone Group Chairman): In the tide of globalization, with China, like many traditional labor-intensive industries, China stone into the international market is the inevitable development of history. Its practical significance is that the cost advantage of China stone to ensure the industry's enterprises and investors can obtain a relatively stable return. Long-term significance but also because through participation in international competition to promote the upgrading of the level of domestic stone veneer industry as a whole, such as the concept of constantly updated technology and equipment, continuous improvement, quality and stability improve this service follow-up and so on.edited by china stone veneer manufacturer

Internationalization is to improve the overall competitiveness of the most important way.

Internationalization is to improve the overall competitiveness of the most important way.

 

 
 

For Chinese stone veneer enterprises, internationalization is to improve the overall competitiveness of the most important way. Wanli Stone in the company since its inception, to determine the development strategy for the international market. Founded nine years, the company has created a line with international standards of good management and marketing team. Therefore, we can proudly tell you that both the company philosophy, corporate culture. Or the quality of products and services, we are not inferior to any one world-class stone business. Wanli Stone bring international realities and long-term significance is far-reaching.
Q: Chinese stone veneer  enterprises in the international market in the process, which will encounter difficulties? As a business, the need to solve their own problems is what?
Mr Lai Guoxiang: 2003, in Germany and Italy held a traditional stone exhibition, local governments receive from the national association of trade associations stone pressure for government does not allow Chinese enterprises to participate in exhibitions stone. This indicates that as the representative of the old European stone producing countries and their trade associations, potential joint attempt to "anti-dumping" to discourage Chinese stone into Europe. Meanwhile, China's stone industry disorderly competition, mainly disorderly competition on price and product variety of similar enterprises, but also to enterprises into the international market has brought difficulties can not be ignored.
If an enterprise can cost in the original, based on improved technology and equipment, increase the technological content to create their own businesses and product brands, develop their own unique products that will help Chinese enterprises to better stone into the international market.
Mr. Wang Jiongyu: Chinese stone late start in the international market difficulties encountered in the process mainly in the following three aspects:
First, the self (including mine, have the ability to export factories and foreign trade companies) disorderly competition. As China's stone industry still at the primary stage, ignoring the technology, quality and service competition.
Second, disorderly exploitation of mines. Because people do not pay attention to the long-term protection of mineral resources, resulting in a second half of 2004 until early this year G603 and G604 mine closure events. Importers of China's lack of confidence, many designers dare to use Chinese products. Mine closure, the company will strive to find a substitute for G603 and actively recommend to importers and designers, the company's image and therefore can be improved.
Third, foreign protectionism. As China stone export volume increases, leading to layoffs and foreign stone business bankruptcy, coupled with China's domestic stone streets of processing non-standardized, unemployed foreign governments to take appropriate stone for their own protection, and a variety of labor and environmental standards to measure restricting China's stone veneer  exports.
To overcome these difficulties, China's enterprises should focus on stone with international standards. First of all, we want to establish brand trust. Corporate image and brand awareness is not * blindly build and price wars to come, only to rely on a solid technology * in order to enhance the quality of the brand trust. The rooms do not simply leading price of winning will damage the interests of the company, but also affect the country's overall image. Secondly, we have to service winner. The 21st century, the quality of service our customers have become a vital supplier selection criteria.
Mr. Hu Jingpei: Generally speaking, Chinese stone enterprises in the international market process is not much obstacles. In addition to the existence of a small number of regional market protection and non-tariff barriers, most of the international markets are open and free.edited by china stone veneer manufacturer

Marble, culture stone price increases there is space

Marble, culture stone price increases there is space

Stone including marble, granite, culture stone veneer, culture stone culture stone also includes natural and artificial culture stone two kinds. Various types of stone for its color, and texture of different production processes, there is a big price difference, but a large marble decorative plates hidden price upside.

Culturde stone veneer  used for local interior decoration
Cultured stone veneer  modeling diverse, different colors, and more for local indoor decoration, such as living room TV wall decor, wrought iron heating cover embossed around the shape, or in the courtyard of the ground handling, decorative effect close to nature, reflecting the ancient decorative style. Artificial culture stone which is made from natural stone scrap reprocessed made of lighter weight, with a non-toxic, no mold, easy installation, suitable as wall local processing to reduce the wall of the loading capacity, prices are more natural culture stone expensive, by the joint venture brand manufacturers, prices generally at 300 yuan / square meter or more, if it is imported stone brand, price will be higher, up to 1000 yuan / square meters. The natural culture stone much cheaper, the price is generally 120-130 yuan / square meters. Consumers can choose according to their economic capacity and the need to purchase.
Marble color determines the price
Marble has always been a fine texture

Cultured stone veneer villa used to judge what is the standard?

Cultured stone veneer  villa used to judge what is the standard?

1, lightweight, anti-shedding. Must use high-strength, lightweight aggregate and no radiation. Per square meter quality ≤ 35KG, per cubic meter density ≤ 1300KG;
2, non-toxic, non-radiation (internal exposure index ≤ 0.6Bq/Kg, external exposure index ≤ 0.8Bq/Kg);
3, wind. To weathering resistance, surface strength must be high.
4, waterproof (water absorption of 17%, after 2.5% protection);
5, ie, acid and alkali resistant (by 0.01mol / L hydrochloric acid solution and 0.01mol / L sodium hydroxide solution was dropped after no obvious damage to the stone surface, the phenomenon of falling blocks without mortar, and restored to its original state);
6, frost resistance (at minus 30 ℃ to minus 10 ℃ after 50 freeze-thaw conditions, no peeling, no breakage.);
7, resistance to artificial aging (150H), no significant change;
8, surface efflorescence and efflorescence. (In fact, this is off base, cement dealkalization, the concrete structure was destroyed, life will be affected);
9, flexural strength can not be too low. Products with low flexural strength, transport losses and construction losses are too great. After some time on the wall, there will be cracks ---- pasted materials generated during contraction forces will pull off culture stone, so the cracks; from other forces will pull off the wall culture stone.
Meet the above criteria can be called "villa culture stone."
edit by china stone veneer manufacturer