RG CHINA STONE VENEER Rock installation on concrete

RG CHINA STONE VENEER Rock installation on concrete

SETTING THE STONE
Using a mason's trowel, apply abut ¾” thick even layer of mortar to the entire back of the stone.
Then press stone firmly into place on the prepared wall, squeezing the mortar out around all edges.
Using a gentle wiggling action while pressing the stone, will ensure a good bond.
Right after setting each stone veneer, use a mason’s trowel or a margin trowel to remove any excess mortar and to fill any voids.
This serves not only to help seal the stone edges but also allows for tighter fitting of following stones.
Just prior to setting each stone, apply a thin bead of mortar with a grout bag to the edges of all previously installed, adjacent stone.
If any mortar accidentally gets on the stone face, do not try to wipe it off as it will smear and stain the stone.
The mortar should be allowed to set until dry and crumbly, and then brushed off with a dry whisk broom.edited by china stone veneer manufacturer